Product Search
Categories
- Special offer until 31.10.2024 (2)
- News (102)
- Special offer (90)
- Musical Instruments
- T O O L S (459)
- Action Parts
- Hammerheads
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps & Candle Holder
- Castor Cup
- Castors & Transport
- surface treatment
- Lubricant / glue
- Covers
- Accessoires
- STEINWAY (103)
- YAMAHA (38)
- Firebasket (11)
- Catalogues + Brochures (4)
Information
Customers who bought this product also bought
Product 178 / 227
BORMA WACHS Holzfarbe 250 ml dark walnut 63
It's the ideal colorant to dye any untreated indoor wooden surface. The various colors in production show off the natural beauty of the wood grain.
Method of Usage
The concentration is ready to use and the characteristics give it as the ideal substitute for all the traditional products like Aniline powders , avoiding the preliminary preparation and the harmful inhalation of the powders. The solution may be diluted with any solvent, alcohol, acetate, thinner or with water with a suggested ratio of 1 : 6 (higher dilutions may change the colour effect). Borma HOLZFARBE can also be used as a pigment for transparent varnishes. Color range: black, green, red, rosewood ,mahogany , yellow , blue, light walnut, dark walnut, orange, teak and oak.
Dilute the product in a ratio of 1 : 6 with water , alcohol, thinner etc.
Apply with a sponge or brush on untreated , clean and sand papered surfaces.
Leave to dry depending on the type of dilution used ; in the case of the product being diluted with water , drying time is between 12 and 24 hrs.
Sand paper lightly than finish with synthetic or shellac based varnishes.
Dangerous goods abroad only with forwarding agency (not DHL)
Method of Usage
The concentration is ready to use and the characteristics give it as the ideal substitute for all the traditional products like Aniline powders , avoiding the preliminary preparation and the harmful inhalation of the powders. The solution may be diluted with any solvent, alcohol, acetate, thinner or with water with a suggested ratio of 1 : 6 (higher dilutions may change the colour effect). Borma HOLZFARBE can also be used as a pigment for transparent varnishes. Color range: black, green, red, rosewood ,mahogany , yellow , blue, light walnut, dark walnut, orange, teak and oak.
Dilute the product in a ratio of 1 : 6 with water , alcohol, thinner etc.
Apply with a sponge or brush on untreated , clean and sand papered surfaces.
Leave to dry depending on the type of dilution used ; in the case of the product being diluted with water , drying time is between 12 and 24 hrs.
Sand paper lightly than finish with synthetic or shellac based varnishes.
Dangerous goods abroad only with forwarding agency (not DHL)