Product Search

DRIVE TIP 50 N�m

Art.No.: 1957

[+] zoom

Made to order. Delivery time approx. 1 week

recommend

DRIVE TIP 50 N�m

Torque wrench with dial gauge display, maximum torque: 50N�m

Instructions PDF

DRIVE TIP In order to check the firmness of the tuning pin on the pin block. The torque should lie between 15 �EUR' 20 Nm. With a towed pointer this is measurable in both directions and is readable. Completely with star hole application of HALE.

10N�m - 50N�m

Instructions PDF
Product details
Technical Data
maximum torque50 Nm
Direction of tighteningFor right and left-hand tightening
Torque measuring accuracy�4 %
Test certificateManufacturer’s test certificate
Overall length L332 mm
Torque range10 Nm - 50 Nm
Scale graduation, 1 graduation =0.5 Nm
Weight600 g
Square drive3/8 in
Displayanalogue
Release signallingvisual
Connection formatPush-through square drive (ratchet)
Measurement technologymechanical
Data can be recordedno
Setting the trigger valueMemory pointer
Feedbackdisplaying
Reversible readingNm
Measurement processTorque
Adjustable trigger valuenon-adjustable
StandardDIN EN ISO 6789
Lever length without plug-in head [l1]221 mm
Lever length including factory calibration reference dimension [l3]257 mm
Type of productTorque Wrench

Description
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm
Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:

l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.