Product Search
Categories
- Special offer until 31.10.2024 (5)
- News (102)
- Special offer (92)
- Musical Instruments
- T O O L S (460)
- Action Parts
- Hammerheads
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps & Candle Holder
- Castor Cup
- Castors & Transport
- surface treatment
- Lubricant / glue
- Covers
- Accessoires
- STEINWAY (103)
- YAMAHA (37)
- Firebasket (11)
- Catalogues + Brochures (5)
Information
Customers who bought this product also bought
.jpg)
Product 22 / 227
Wood Hardener - Consolidating agent for wood 500 ml
BormaWachs wood hardener breathes new life into your wood!
Ready-to-use quick-drying acrylic resin dispersion solvent, that strengthens and hardens every type of porous
and soft wood (also as a result of worm infestation). Completely transparent, it does not change the natural tone,
but it penetrates deeply and seals the wood and reproduces the original consistency. Suitable for inside and outside.
use Our wood hardener is suitable for unpainted surfaces, which can, however, be treated with wood compound or wooden spatula.
If wood paint or alcohol stain has been applied beforehand, these products must be completely dry. Remove any residues of dust,
wax or grease and sand the surface. Apply liberally with a brush. To improve the result, repeat the process 2-3 times.
Please wait about 30 minutes between applications. After applying, let the wood dry for 6-8 hours at a temperature of 20 ° C.
When everything is dry, sand the surface with a grit of 220 to 240. You can then paint the surface. The wood must be dry when used.
500 ml
Safety data sheet either here as a download. If not please request.
Ready-to-use quick-drying acrylic resin dispersion solvent, that strengthens and hardens every type of porous
and soft wood (also as a result of worm infestation). Completely transparent, it does not change the natural tone,
but it penetrates deeply and seals the wood and reproduces the original consistency. Suitable for inside and outside.
use Our wood hardener is suitable for unpainted surfaces, which can, however, be treated with wood compound or wooden spatula.
If wood paint or alcohol stain has been applied beforehand, these products must be completely dry. Remove any residues of dust,
wax or grease and sand the surface. Apply liberally with a brush. To improve the result, repeat the process 2-3 times.
Please wait about 30 minutes between applications. After applying, let the wood dry for 6-8 hours at a temperature of 20 ° C.
When everything is dry, sand the surface with a grit of 220 to 240. You can then paint the surface. The wood must be dry when used.
500 ml
Safety data sheet either here as a download. If not please request.
